NASJI
Double Door Swing Plan CAD Block — Two 90-Degree Leaves
Double door in plan with two quarter-arc swings, jambs and wall stubs, one block on layer A-Door.
Up to 100 library downloads per day across all libraries. Resets at 00:00 UTC.
DWG is the original file. DXF is written from it on request. Open in CAD loads it into the free browser CAD — nothing to install, no account.
Specifications
- Format
- DWG R2018 · DXF R2000 on request
- Units
- metresread from the geometry — the file's unit flag says inches, but it is metre-sized
- Size
- 5 × 2 m (width × height)
- Entities
- 2 — 1 block reference and 1 paragraph text
- Layers
- A-Door
- Block definitions
- none — plain geometry
- File size
- 34 KB
- Updated
About this block
The block shows a pair of leaves opening 90 degrees to the same side, each with a quarter arc, meeting at a centre line; the jambs are drawn as small rectangles and the wall continues as long stubs to either side. It is a single block definition, AP0E08, of 26 lines and 8 arcs on layer A-Door, spanning 5.2 by 1.2 drawing units. The leaves are about 1.2 units long, so read in metres it is a 2.4 m wide double door.
This is the standard double-door symbol for main entrances, halls and wide internal openings in plans at 1:50 and 1:100. Insert it with the centre of the opening on your door axis, trim the wall between the stubs, and scale by 1000 for millimetre drawings. Mirror the block about the wall line to flip the swing direction, and use the 180-degree version in this category when the leaves fold back flat.
Ratings and reviews
Related blocks
Single Door 180-Degree Swing Plan
Single-leaf door in plan with a 180-degree semicircle swing and wall stubs, one block on A-Door.
34 KB · 2 entities
Arched Glass Panel Door Elevation With Handle
Single arched door elevation with a gridded glass panel and lever handle, drawn as loose linework.
33 KB · 33 entities