NASJI
Door CAD Block 08 — Double Doors in Two Parallel Walls, Plan
Two double doors in parallel walls with 90-degree swings, one block about 3.6 units wide on layer A-Door.
Up to 100 library downloads per day across all libraries. Resets at 00:00 UTC.
DWG is the original file. DXF is written from it on request. Open in CAD loads it into the free browser CAD — nothing to install, no account.
Specifications
- Format
- DWG R2018 · DXF R2000 on request
- Units
- metresread from the geometry — the file's unit flag says inches, but it is metre-sized
- Size
- 3.5 × 1.9 m (width × height)
- Entities
- 2 — 1 block reference and 1 paragraph text
- Layers
- A-Door
- Block definitions
- none — plain geometry
- File size
- 36 KB
- Updated
About this block
The block draws two parallel walls, each pierced by a double door whose leaves swing 90 degrees into the space between them, with jambs shown as small boxes and wall stubs continuing left and right. It is one block definition, AP0E13, built from 72 lines and 8 arcs on layer A-Door, and it spans 3.64 by 1.51 drawing units. In metres that is a pair of 1.8 m openings a metre and a half apart, a typical entrance lobby.
Use it for entrance halls, wind lobbies and corridor fire-door pairs at 1:100 and 1:50. Insert with the outer wall on your external wall line and trim the wall to the stubs; the inner wall can be moved with Stretch if the lobby is deeper. Scale by 1000 in a millimetre drawing. Compare with Door CAD Block 06, which has double-acting leaves and a closed square lobby instead of open sides.
Ratings and reviews
Related blocks
Double Door Swing Plan
Double door in plan with two quarter-arc swings, jambs and wall stubs, one block on layer A-Door.
34 KB · 2 entities
