NASJI
Plan-view CAD block of a four-wing revolving door with curved enclosure walls
nasji.com · Drawing preview · 2 entities · 2 layers View full size

Doors CAD blocks

Door CAD Block 04 — Revolving Door in Plan

Four-wing revolving door in plan with curved enclosure and wall stubs, one block about 1.8 m across.

Download DWG · 35 KBDownload DXFEdit this block in free CAD

Up to 100 library downloads per day across all libraries. Resets at 00:00 UTC.

DWG is the original file. DXF is written from it on request. Open in CAD loads it into the free browser CAD — nothing to install, no account.

Specifications

Format
DWG R2018 · DXF R2000 on request
Units
metresread from the geometry — the file's unit flag says inches, but it is metre-sized
Size
3 × 2.4 m (width × height)
Entities
2 — 1 block reference and 1 paragraph text
Layers
A-Door
Block definitions
none — plain geometry
File size
35 KB
Updated

About this block

The plan shows a revolving door with four wings meeting at a central hub circle, enclosed by two curved wall segments with small end posts, and straight wall stubs continuing on either side. It is one block definition, AP0E09, made of 12 lines, 12 polylines and 4 arcs on the A-Door layer. The drum measures about 1.8 drawing units across, and the whole symbol is 3.12 by 1.83 units, which is a real revolving door in metres.

Use it at hotel, office and retail entrances in plans at 1:100 and 1:50, where the drum diameter and the clear throat between the curved walls matter for the lobby layout. Insert the block with its centre on the entrance axis, then trim the adjoining walls to the stubs. Scale by 1000 in millimetre drawings. Rotating the block by 45 degrees changes the wing position without affecting the enclosure geometry.

Ratings and reviews

Related blocks

Plan-view CAD block of a double door with two 180-degree swing arcs

Door5

Double door in plan with both leaves swinging 180 degrees, one block 2.8 units wide on layer A-Door.

34 KB · 2 entities

DWGDXFOpen

Plan-view CAD block of two adjacent double-acting double doors with swing arcs

Door3

Two double-acting double doors side by side in plan, one block about 5.6 units wide on layer A-Door.

34 KB · 2 entities

DWGDXFOpen

Plan-view CAD block of a square entrance vestibule with double-acting doors at both ends

Door6

Square vestibule in plan with double-acting double doors front and back, one block about 2.2 m square.

35 KB · 2 entities

DWGDXFOpen

Plan-view CAD block of double doors in two parallel walls with quarter-arc swings

Door8

Two double doors in parallel walls with 90-degree swings, one block about 3.6 units wide on layer A-Door.

36 KB · 2 entities

DWGDXFOpen

Plan-view CAD block of double-acting double doors with swing circles between wall stubs

Door 2

Plan of double-acting double doors with swing circles both ways, one block about 5.2 units long.

34 KB · 2 entities

DWGDXFOpen

Questions

What diameter is the drum?

About 1.8 metres in the drawing units, a common size for a small revolving door; scale the block if your specification differs.

Can I rotate the wings?

Rotate the whole block by 45 degrees for a different wing position, or explode it and rotate only the four wing lines about the hub.