NASJI
Plan-view CAD block of three detailed armchairs around a small round coffee table
nasji.com · Drawing preview · 3 entities · 3 layers View full size

Furniture CAD blocks

Three-Seater Small Coffee Table Set with Detailed Chairs — Plan

Three richly drawn armchairs and a small round table in plan, including a sketchy plant, on layers furn and FIRNTUR.

Up to 100 library downloads per day across all libraries. Resets at 00:00 UTC.

DWG is the original file. DXF is written from it on request. Open in CAD loads it into the free browser CAD — nothing to install, no account.

Specifications

Format
DWG R2018 · DXF R2000 on request
Units
metresread from the geometry — the file's unit flag says inches, but it is metre-sized
Size
2.7 × 2.2 m (width × height)
Entities
32 block references and 1 paragraph text
Layers
furnFIRNTUR
Block definitions
none — plain geometry
File size
51 KB
Updated

About this block

Unlike the simpler coffee sets, this one uses heavily rendered chairs: two blocks named CHAIR5 and CHAIR6 with 190 and 196 entities, mostly arcs describing curved seat cushions and arms, plus a blue armchair drawn with rounded arms at the bottom, a round side table drawn as a double circle, and a loose spline sketch of a potted plant. The inserts sit on layers furn and FIRNTUR, and the group spans 2.77 by 1.9 drawing units, so the chairs are about 0.8 m wide in metres.

Use it in presentation plans at 1:50 where the seating needs to look upholstered rather than diagrammatic, for hotel lobbies, lounges and reception areas. The detailed chairs are heavier than average, so avoid arraying hundreds of them. Swap the plant sketch for a cleaner plant block if you print at small scale, and scale by 1000 for millimetre drawings.

Ratings and reviews

Questions

Why does the file look busier than other coffee sets?

The chairs are drawn with almost 200 arcs each to show cushions and arms, which reads well in presentation plans at 1:50.

Is the plant a separate object?

Yes. It is loose spline geometry beside the chairs and can be deleted or replaced without touching the blocks.