NASJI
Bowrider Speedboat Plan and Side
Bowrider in profile and deck plan, 48 polylines and lines placed at six-tenths scale.
Up to 100 library downloads per day across all libraries. Resets at 00:00 UTC.
DWG is the original file. DXF is written from it on request. Open in CAD loads it into the free browser CAD — nothing to install, no account.
Specifications
- Format
- DWG R2018 · DXF R2000 on request
- Units
- metresread from the geometry — the file's unit flag says inches, but it is metre-sized
- Size
- 4.8 × 4.2 m (width × height)
- Entities
- 2 — 1 block reference and 1 paragraph text
- Layers
- furn
- Block definitions
- none — plain geometry
- File size
- 40 KB
- Updated
About this block
Two views of an open sports boat. The profile carries the raked windscreen, the sheer and chine lines sweeping to a fine bow, and a transom cut for an outboard leg. The deck plan underneath shows the walk-through windscreen, two seats side by side at the helm, a bench across the stern and the bow lounge ahead of the screen. The definition behind it is small and tidy, 24 polylines and 24 lines, and it carries the name Archi.Space.Cars546, left over from a road-vehicle library.
Lake resorts, river frontages and small marinas are the drawings that call for a boat this size, around 6 m long and drawn at 1:100. Rename the block on insertion, because a boat filed under Cars546 will puzzle whoever opens the drawing after you. The pair of views lands in a 4.8 by 3.2 unit frame at six-tenths scale, so scale until the hull reads 6 m, then delete the profile if you are only laying out moorings from above.
Ratings and reviews
Related blocks
Minivan Side Elevation
Minivan profile built entirely from 80 polylines, ready to hatch or fill as a silhouette.
55 KB · 2 entities
Airplane 5
Profile of a 33.5 m twin-jet airliner with the gear down, drawn at full size in inches.
44 KB · 2 entities
