NASJI
L-Shaped Kitchen Run with Sink and Hob
Corner kitchen run in plan, 2.24 by 2.67 m, with a twin-bowl sink and a two-burner hob.
Up to 100 library downloads per day across all libraries. Resets at 00:00 UTC.
DWG is the original file. DXF is written from it on request. Open in CAD loads it into the free browser CAD — nothing to install, no account.
Specifications
- Format
- DWG R2018 · DXF R2000 on request
- Units
- metresread from the geometry — the file's unit flag says inches, but it is metre-sized
- Size
- 2.2 × 3.3 m (width × height)
- Entities
- 42 — 21 polylines, 15 lines, 4 circles, 1 arc and 1 paragraph text
- Layers
- NOI THAT
- Block definitions
- none — plain geometry
- File size
- 35 KB
- Updated
About this block
Two 600 mm deep legs meet at a mitred corner: a 1.31 m leg carrying the sink and a 2.23 m leg carrying the hob, a footprint of 2.24 by 2.67 m in all. The sink is drawn as a 490 by 1,260 mm inset with two rounded bowls, an 82 mm waste in each and six drainer grooves above them. The hob covers 760 by 440 mm with two 164 mm rings and cross-shaped pan supports. Forty-two entities sit on layers 0 and NOI THAT.
This is the corner kitchen of a small apartment, with the sink under a window on the short leg and cooking on the return. Use it whole at 1:50 to test whether a 2.2 by 2.7 m corner will take a working kitchen, and at 1:100 in a flat-layout sheet where each unit is repeated. Below the sink leg a dashed 680 by 600 mm rectangle marks the space for an under-counter appliance such as a dishwasher.
That dashed rectangle uses the HIDDEN linetype. If it plots as a solid outline, load HIDDEN into your drawing and set LTSCALE to about 0.02 for a file drawn in metres, or 20 for one in millimetres. NOI THAT is Vietnamese for interior furnishing, so remap it to your joinery layer while layer 0 keeps the carcass lines. Nothing is blocked, which means you can drag the hob along the run without exploding anything.
Ratings and reviews
Related blocks
L-Shaped Kitchen Countertop With Stovetop & Sink
L-shaped counter in plan, 3.62 by 2.51 m, with base-unit divisions and a two-burner hob.
34 KB · 42 entities
Straight Kitchen Countertop With Stovetop & Double Sink
Single-wall kitchen counter in plan, 2.51 by 0.60 m, with a two-burner hob and twin-bowl sink.
36 KB · 95 entities
Kitchen Layout With Island, Bar Seating & Round Dining Table
Angled kitchen run with sink and hob, rounded island with three stools, and a six-seat round dining table in plan.
Furniture · 41 KB · 2 entities
3-Burner Compact Built-In Cooktop
Compact three-burner gas hob in plan, 660 by 530 mm, with a knob strip down one side.
34 KB · 47 entities
Rectangular Double-Bowl Kitchen Sink With Drainboard
Twin-bowl sink top in plan, 1440 by 600 mm, with square bowls and a seven-groove drainer.
36 KB · 2 entities
4-Burner Built-In Cooktop
Four-burner built-in hob in plan, 762 by 533 mm, with equal rings and a four-knob panel.
33 KB · 23 entities